G-RAID Mini Operation & User’s Manual

9, 3. Click on the Partition button. Under Volume Scheme, choose 1 Partition. 17. Click the Options button to choose the proper partition scheme. Click the radio button for GUID Partition Table, then click OK. 18. Rename the Volume: G-RAID mini or any other name you wish in the Na…

15, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. How do local laws apply? THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. G-Technology, a division of Hitachi Global Storage Technologies Tel: (310) 4…

11, The icon for your G-RAID mini has now been restored. You can now close the Get Info window. After reinitializing the drive and restoring your icon, your G-RAID mini is ready for use. Conguring G-RAID mini for RAID 0 Mode If you have congured G-RAID mini as RAID 1 and you wish to …

7, 2. Click on the Continue button. The following window will appear. NOTE: Since you are connected via USB, the search process may take a few minutes. 3. Once the utility nds your G-RAID mini, the following window will appear. 4. Select the RAID 1 (Protected) radio button as shown below and…

12, G-RAID Mini 4. Enter G-RAID mini in the Name eld. 5. Click the Erase button and the following dialog box will appear. WARNING: THIS NEXT STEP WILL ERASE ALL DATA ON YOUR DRIVE. 6. Click the Erase button and your drive will be formatted to its full capacity as FAT32. With this format, yo…