e-Line Technology Network dome camera Instruction Manual

19, 27 28 Web Configuration 4. Click OK to save changes. The camera will restart with the new IP address. 6.7.2 Device Port The Device Port page ( Device Configuration>Device Port) allows you to configure the camera’s port configuration. The camera has the follo…

13, e-Line Technology Network dome camera 15 16 Configuring Remote Connection 5.1 Connecting to a DDNS address using NVMS NOTE: Complete all the steps above before performing the f o ll owing method. 1. Open NVMS and click Device Manager>Video Device Manager. 2. Click Manager . The Device M…

22, 33 34 Web Configuration To change the language for the OSD and email alarms: 1. Click Device Configuration>Language. 2. Under Language , select the desired language then click OK to save changes. 6.8 Alarm Configuration Alarm Configuration contains the following su…

26, 41 42 Web Configuration 6. Set up recording using the Record Policy sub-menu (see “6.9.1 Record Directory” on page 36). To access your recordings, use NVMS or m a nu a ll y access yo u r NAS device. NOTE: On the Record Directory page, Status w…

18, 25 26 Web Configuration • Frame Rate: Select the frame rate for the stream up to maximum of 30FPS for stream1 or stream2 or 12FPS for stream3. NOTE: Frame rate ma y be a utoma t ical l y adjusted to ac c o un t f o r bandwidth limitations. • I Frame …

5, TABLE OF CONTENTS 1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Default Camera Username, Password, and Ports . . . . . . . . . . . 1 1.2 Camera Interior Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .…