B & G Zeus2 series Installation Manual

35, | 29 Software setup | Zeus Installation Manual Software updates and data backup From time to time B&G releases software updates to its existing products. Updates are created for a variety of reasons; to add or improve features, to add support for new external devices, or to …

36, 30 | Software setup | Zeus Installation Manual NMEA 0183 setup The NMEA 0183 port must be set to suit the speed of connected devices, and can be be con gured to output only the sentences required by listening devices. Receive waypoint Select this option to allow device capable of c…

14, 8 | Wiring | Zeus Installation Manual Power Control connection The yellow Power Control wire on the Zeus power cable can either be an input that will turn on the processor when power is applied, or an output that turns on other devices when the processor is powered on. It can be con …

18, 12 | Wiring | Zeus Installation Manual The following drawing demonstrates a typical small network. The backbone is made up of direcly interconnected T-piece joiners and an extension cable, which is terminated at each end. + _ 12 V DC TT 9 8 5 7 6 4 3 2 1 9 1 GPS antenna 2 …

42, B & G Zeus2 series 36 | Supported data | Zeus Installation Manual 129540 GNSS Sats in View 129794 AIS Class A Static and Voyage Related Data 129801 AIS Addressed Safety Related Message 129802 AIS Safety Related Broadcast Message 129808 DSC Call Information 129809 AIS Class B “CS” Static Data Report,…