D-MAX DCC-500F Operation & User’s Manual

14, D-MAX DCC-500F - MIDDLE : The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging. - HIGH : The level of noise is reduced greatly, however there is an increase in ghost imaging. When AGC is turned off, DNR does not operate. 8) SENS UP SENS UP help…

9, the type of monitor and accessories. Please refer to the user's manual for each instrument. Please turn off the power when connecting. 3) Connecting to power DC Power Type (DC 12V, 500mA) 15 Please use the specified lens connection parts as shown in the picture below. The use of the…

20, 37 If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. 36 7. Troubleshooting Please check the power connection. Please check the video signal line connection. Please check and make sure that th…

3, 2 3 ContentsWarning 1. Features 4 2. Components & Cable Connection 6 3. Names and functions of parts 7 4. Installation & Dimension 10 5. Setup Menu Operation 16 6. Special Menu operation 27 7. Troubleshooting 36 8. Specifications 38 The camera needs periodic inspection. Conta…

17, ON : The color mode is selected by default, and the modes do not change Automatically. When the AGC is turned off, COLOR does not operate. When an infrared light is used, there may be a problem with focusing. 4) SYNC " Sync " mode is fixed to INT in DC12V input power. 5) MOTION DE…

18, Please press the SETUP button to save the changes and complete the setting. 6) PRIVACY This mode conceals the areas you do not wish to appear on the screen. OFF : Cancels the PRIVACY mode ON : Operates the PRIVACY mode. Please press the SETUP button. Please select the area you do not wis…