Acculab ATL-224 Operating Instructions Manual

46, Acculab ATL-224 Purpose Your balance comes equipped with an interface port for connection to a computer or other peripheral device. You can use a computer to change, start and/or monitor the functions of the balance and the application programs. Preparation You can set these parameters for other devices in …

11, 11 Overview of Display Elements Operation 1 2 3 4 5 6 12 11 10 9 8 7 ATILON ZERO TARE PRINT ON/OFF ENTER MENUECLEAR CAL Pos. Designation 1 Weight unit 2 Menu level indicator 3 Symbol: “GLP printing mode active” 4 Symbol: “Printing mode active” 5 Symbol: “Application program active…

27, 27 Display symbol: Z Purpose With the Counting program you can determine the number of parts that each have approximately equal weight. To do this, a known number of parts (the reference sample quan- tity) is weighed first, and the individual piece weight (refer- ence weight) is calculated from thi…

3, 3 Safety § To prevent damage to the equipment, please read these operating instructions carefully before using the balance. !Do not use this equipment in hazardous areas. !The balance may be opened only by trained service technicians. !Disconnect the balance from power before connecting or d…

49, 49 Safety Inspection If there is any indication that safe operation of the balance is no longer warranted: § Turn off the power and disconnect the equipment from AC power immediately. > Lock the equipment in a secure place to ensure that it can- not be used for the time being…