BARIX FTP MP3 Player Operation & User’s Manual

5, 1 Introduction 1.1 About the “FTP MP3 Player” firmware The “FTP MP3 Player” firmware was especially designed to support audio distribution by network, when a fast or reliable network is not guaranteed, or network access is limited. The application can use either the FTP or HTTP pro…

28, 7 Updating the Firmware in a new device Barix preloads Exstreamer family devices with either the 'Streaming Client' firmware (USA), or the “Exstreamer standard firmware” (ROTW). In both cases, the firmware will need updating to the ABCL FTPMP3 Player application.…

14, 4 Web Interface You can adjust network settings and monitoring settings of Barix devices via the device's Web interface. To enter the configuration mode you will need: • the IP address, as announced over the audio outputs (see the Quick Install Guide) • a standard web browser Open yo…

6, http://wiki.barix.com/index.php5/USB_device_compatibility_list 1.4 Loading the FTPMP3 Firmware No Barix device is supplied with the FTPMP3 application preloaded; you will need to update the firmware in the device. If you do not already have one, you will need to obtain a registered user ID from…

19, BARIX FTP MP3 Player On the page all playlists with their corresponding time settings are displayed, marking also the current one. An example view of the page is shown on Illustration 2. If the application is not running for some reason, or the device hasn't completed the boot up process, an “Error 4…

12, It is easy to create the length files using the WriteFileSize tool, which is included in the firmware update archives. See how to get newest version of the firmware update archive in the chapter 7 Updating the Firmware in a New device on page 42. WriteFileSize is a command-line to…