Fire-Lite ECC-FFT Instruction Manual

22, 22 ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 Installation Audio Phone Circuit Installation Single Phone Jack Audio Circuit in Class A Configuration Figure 2.12 illustrates a phone jack audio circuit (Class A) and SLC for Style 6 & 7 (Class A) con- figuration. 0 10 11 12…

30, 30 ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 Slide-in Labels Autoprogram Operation …

25, ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 25 Audio Phone Circuit Installation Installation Telephone Jack Only Audio Circuit The FFT can also be configured using only the Fire Fighters Phone Jack (FPJ-F). In this configura- tion, the MMF-301 module is not require…

18, 18 ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 Installation SLC Device Installation Figure 2.8 and Figure 2.9 show how length is determined for out and return style wiring. When using T-taps, the total length of all taps and the main bus must not exceed 40,000 feet. …

17, Fire-Lite ECC-FFT ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 17 SLC Device Installation Installation 2.7 SLC Device Installation 2.7.1 List of SLC Devices The following SLC device can be used with the Fire Fighters Phone. See the device installation instructions for more informati…

20, 20 ECC-FFT Instruction Manual — P/N LS10031-000FL-E:B 9/4/2013 Installation Audio Phone Circuit Installation Example 1: To select device address 10, turn the ONES rotary dial to 0 and the TENS rotary dial to 1 as shown below. Example 2: To select device address 42, turn the ONES rota…