Garrison 52-2544-0 Installation Manual

8, 6 INSTALLATION IT IS STRONGLY RECOMMENDED TO HAVE A CERTIFIED ELECTRICIAN ON SITE TO ENSURE THE SAFE INSTALLATION OF YOUR THERMOSTAT. The manufacturer assumes no responsibility for improper wiring, or any resulting damages. Improper installation by a non-professional automatical…

6, System Type Central Heating Furnace System(24V) Baseboard Electric Heater (120/240V) Fan Assisted (Convectors) Compatible with Thermostat No Yes Yes Compatibility Generally, equipment with high voltage control is only compatible with the electric baseboards, convectors or radiant heating sy…

15, 13 Select ºC or ºF (Celsius or Fahrenheit) Press OPTION/COPY for 3 seconds to enter the option setting mode. Press OPTION/COPY 3 times (until °F / °C begins flashing) Press UP or DOWN to toggle between the °F or °C setting. Wait 15 seconds for normal display to return. (See Optio…

20, Garrison 52-2544-0 If you have difficulties programming your thermostat you may wish to reset the unit to begin again. RESET PROGRAMS To delete all custom programs: Press OPTION/COPY for 3 seconds to enter the Options mode. Press PROG for 3 seconds to clear all custom programs. Note: This reset will c…

14, SET CLOCK 12 P1 TU PM SET TIME WEEKDAYS Set Clock / Weekday Press and hold the USAGE/TIME button for 3 seconds to enter the clock setting mode. (SET will display and the clock symbol/time flashes) Press the UP or DOWN button to scroll to the correct time of day, hold the button to ac…

5, Introduction This thermostat is compatible with electric baseboards, fan- forced (convectors) and radiant floor/ceiling heating systems. The unit is rated for high voltage wiring only (120V / 240V). The minimum load requirement is 500W. This thermostat is NOT compatible with central heating sys…