ICT EliteSuite Operation & User’s Manual

7, EliteSuite™ User Manual 4 new status/mode, the keypad generates a series of four audible tones. Rejection Tone When the system times out or when an operation is incorrectly entered on the keypad, it will generate a continuous audible tone for three seconds. A…

4, EliteSuite™ User Manual 1 INTRODUCTION Your suite has been equipped with the EliteSuite™ Security System. The EliteSuite™ Security System will give you peace of mind by providing reliable security protection. The EliteSuite™ System is an advanced technology security …

6, EliteSuite™ User Manual 3 Power / Trouble Indicator When FLASHING, indicates that there is a trouble condition present. When ON, the system is powered and operating normally. If there is a complete power failure this indicator will be OFF. Ready Indicator When ON, t…

36, Unit C, 6 Ascension Place, Mairangi Bay, P.O. Box 302-340 North Harbour, Auckland, New Zealand. Phone: +64 (9) 476 7124 y Fax: +64 (9) 476 7128 www.integratedcontroltechnology.com …

10, ICT EliteSuite EliteSuite™ User Manual 7 USER CODES User Codes are personal identification numbers that allow you to enter certain programming modes, arm or disarm your EliteSuite™ system as well as activate or deactivate home automation functions. The EliteSuite™ system supports up t…

13, EliteSuite™ User Manual 10 MODIFYING USER OPTIONS The User Option menu contains options for arming, disarming and door latching for the optional Card Reader interface. If your EliteSuite™ system is not equipped with a Card Reader interface, changes to these op…