Beam Oceana 800 Operation & User’s Manual

7, BEAM Oceana 800 - Installation & User Manual 7 Safety Information IMPORTANT! Please read the following information carefully before installing and using the Oceana 800. Failing to follow instructions may compromise the safety of the product and may result in personal injur…

52, 52 Personalised settings Sounds, ringtones and profiles Your current sound prole is always displayed in the status bar of the main screen, and can also be accessed via Info. To change your terminal’s sound prole, select Menu > Proles, and highlight the one you want and press the…

38, 38 Advanced call features Advanced call features are controlled by the Inmarsat network. To check or change these features, the Terminalmust be connected to the satellite with a signal strength of at least two bars. Sending your caller ID Select Menu > Settings > Call settings > Send …

61, BEAM Oceana 800 - Installation & User Manual 61 Mitigation of RF Interference Service degradation due to RF interference can be signicantly improved by: • Increasing the distance and moving the antenna o axis from the source of the interference, and • Using an …

65, BEAM Oceana 800 - Installation & User Manual 65 Troubleshooting 1 My terminal cannot make or receive calls. Ensure the SIM card is inserted in the terminal and is fully provisioned by your service provider Check you have a valid GPS x (See “Using your GPS location information” o…

62, Beam Oceana 800 62 Specification Summary Electrical & Environmental Specifications - Oceana 800 Average Power Consumption Current @ 15V DC Average Watts Standby 0.22 A 3.2 W Transmit (RJ11/POTS) 0.58 A 8.7 W Transmit (Speakerphone) 0.53 A 7.9 W Sleep Mode 5mA 75mW Peak Current 1.7 A 26 W P…