Beef Eater 1100s Assembly Instructions Manual

2, 2 Content: Mrk Qty description 1 1 Base Panel 2 1 Right Hand Side Panel 3 1 Left Hand Side Panel 4 1 Rear Panel 5 1 Top Fro…

6, Beef Eater 1100s 6 Step 7 Adjust the Top Brace (from step 4) to right position, so the doors are closing straight, and tighten the 4 screws. Step 8 8 x ‘H’, 8 x ‘G’ Fit the shelf and Side Burner (or 2 shelves) to the side of the Barbecue. Note: screws to go fro…

4, 4 Step 3 4 x ‘D’ Step 4 4 x ‘B’, 4 x ‘C’ Attach the Top Brace. Do not tighten. That will be done after fitting the doors. If required, attach the Hinge Blocks to front …

3, 3 1100Series Assembly Procedure Step 1 2 x ‘A’ Step 2 13 x ‘B’, 13 x ‘C’, 2 x ‘F’ Turn the Base Panel upside-down, insert the Wheel Axel through the 2 holes, and place a wheel on each side. Secur…

7, 7 Step 10 8 x ‘J’ If connecting Side Burner, the hose is attached to inlet ‘B’ above, and connected to Side Burner manifold as follows: Warranty Warranty terms and condition in BBQ Instructions book P. 11 apply to this trolley as well. All p…