DAGE-MTI HR120 Operation & User’s Manual

11, Limitations 1. This warranty is valid only if the malfunctioning unit is returned to DAGE-MTI service depot, This warranty does not cover on-location service. If warranty work is needed, the following should be contacted: DAGE-MTI, INC. Customer Service 701 N. Roeske Av…

7, DAGE-MTI HR120 The IMPEDIANCE switch provides convenient selection of a 75Ω termination when the video signal only goes to the monitor, or when the monitor is the last video component attached to the video line. When the video signal is looping through the monitor, the switch must be set in the HI posi…

3, Introduction The DAGE-MTI HR120 monochrome monitor provides a cost-effective method for viewing video images in almost any environment. The rugged construction of these monitors allows them to be used in a variety of situations. The wide range of contrast and brightness…

2, Purchaser’s Record Model Name: DAGE-MTI HR120 Serial Number: Dealer’s Name: Dealer’s Address: Dealer’s Phone Number: Date Purchased: P.O. Number: …

4, Front Panel Operation HR120 DAGE-MTI Figure 1: HR120 Front Panel Power Switch This push-button switch turns the monitor on and off. To turn the monitor on, push the switch button. The green LED above the switch lights to indicate that the monitor is on. Horizontal Hold This …