Mackenzie M2 Operation & User’s Manual

18, M2 User's Manual V 1.0 Revised 4/21/2003 Page 18 5. Playing - Remote Contact Remote Control playback is achieved through the remote control connections located on the endplate of the M2 unit. Please reference Section 2.2 of this manual for additional information on available connections. Play…

9, M2 User's Manual V 1.0 Revised 4/21/2003 Page 9 2.2.7. Config Switches 8 position DIP Switch: UP Position is OFF DOWN Position is ON This user adjustable dip switch is provided to allow the user to tailor the operation of the M2 to meet their demands. Note: This dip switch is …

14, M2 User's Manual V 1.0 Revised 4/21/2003 Page 14 BLD - (same function as PRI S). Build message file index. Required to activate files that are copied to the memory card outside of the Composer process. Syntax; BLD Example; BLD<CR><LF> Builds message file index. DIR -…

8, M2 User's Manual V 1.0 Revised 4/21/2003 Page 8 2.2.3. Audio Level Adjust Two potentiometer to adjust playback level of the left and right channels individually. Range is continuous from -infinity to +4dBm. 2.2.4. Relay Playing relay is a Form C contact closure. This contact is activated…

7, Mackenzie M2 M2 User's Manual V 1.0 Revised 4/21/2003 Page 7 2. Installation & Configuration This section provides complete instructions for mounting the M2 High Fidelity Multi-Channel Digital Audio Player on a Wall or Table. It also illustrates all interface requirements to auxiliary equipment, inc…

3, M2 User's Manual V 1.0 Revised 4/21/2003 Page 3 Table of Contents 1. OVERVIEW.......................................................................................................................................................................4 1.1. Features and Capabilities...…