Transcend TS-ASL3 Operation & User’s Manual

16, Transcend TS-ASL3 11 HARDWARE INSTALLATION 2.7 Keyboard Wake-Up (JP6 3-pin KB-AWK) This function allows the Keyboard to Power Up the system. Set this jumper to “Enable” if you’d like your Keyboard to be able to Power Up your computer. Then, go to the”Power On Function” in “Integrated…

44, 39 BIOS SETUP •• •• • Use IR Pins This option selects IR transmission routing. The two choices are: RxD2,TxD2  COMB Connector or IR-Rx2Tx2  IR Connector •• •• • Onboard Parallel Port Select a logical LPT port name and matching address for the physical parallel (pri…

48, 43 BIOS SETUP Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 FDD, COM, LPT Port PCI PIRQ[A-D]# The settings in these fields “enable” or “disable” the detection of IDE, floppy, serial and parallel port activities for powering down state transition. Actually, it detects…

31, [+] Increase the numeric value or make changes [-] Decrease the numeric value or make changes [F1] General help on setup navigation keys [F5] Load previous values from CMOS [F6] Load the Fail-Safe Defaults from BIOS default table [F7] Load the Optimized Defaults [F10] Save all CMOS changes and e…

51, BIOS SETUP 46 Transcend Information, Inc. • Shutdown Temperature This field allows you to set the CPU shutdown temperature. The choices are: “60°C/ 140°F”, “65°C/149°F”, “70°C/158°F” and “75°C/167°F”. • Current CPU Temperature This field displays the CPU tempe…

38, 33 BIOS SETUP • Report No FDD For WIN 95 Select “Yes” to release IRQ6 when there is no FDD, for compatibility with WIN 95 logo certification. • Delay For HDD (Secs) Generally, you can set this field as “0”, but for some old HDDs, you may need to increase th…