Macpower & Tytech M9-LAN User Manual & Installation Manual

9, You can choose to create several partitions via USB. However please note that only the first partition will be recognised on the network (LAN disk function). The drive must be formatted using the FAT32 file system. Alternatively, you can also format the LAN disk usi…

13, If you forget your login name or password, press and hold the reset button, turn on the device and wait for 10 seconds before releasing it. This will reset the device to its factory default setting. System default language is English. If you want to store or transfer fi…

8, Macpower & Tytech M9-LAN If the system doesn’t recognise the drive, turn on the power first, before connecting the USB cable. For safe removal of your drive and to assure that no data is lost, always follow the unplug procedure. Not following these instructions may lead to an error…

2, Table of Contents CHAPTER 1 - INTRODUCTION - 1 - CHAPTER 4 – LAN DISK SETUP - 10 - ICON KEY - 1 - NETWORK INSTALLATION ON A PC - 10 - NETWORK INSTALLATION ON A MAC - 10 - THE M9-LAN - 1 - PACKAGE CONTENTS - 1 - CONFIGURING THE LAN DISK - 10 - SYSTEM REQUIREMENTS - 2 - LOGIN ON A PC…

18, Q: I get Error Code -36 A: The Finder cannot complete the operation because some data in "smb://storage" could not be read or written. If you get the above error message, use the IP address instead of STORAGE. See following steps: 1) Log in via your web browser. 2) U…