Dalsa Pantera TF 11M4 Operation & User’s Manual

35, Pantera TF 11M and 6M User’s Manual Preliminary 35 DALSA 03-32-10096-03 Test Patterns Figure 20: 8 Bit Test Pattern (One Output) Figure 21: 10 Bit Test Pattern (One Output) …

47, Pantera TF 11M and 6M User’s Manual Preliminary 47 DALSA 03-32-10096-03 LED Status Located on the back of the camera is a red/green LED used to display the operational status of the camera. Red lights indicate errors or warnings and green lights indicate progress and OKs. Error and w…

18, 18 Preliminary Pantera TF 11M and 6M User’s Manual DALSA 03-32-10096-03 Data Clocking Signals These signals indicate when data is valid, allowing you to clock the data from the camera to your acquisition system. These signals are part of the Camera Link configuration and you sho…

26, 26 Preliminary Pantera TF 11M and 6M User’s Manual DALSA 03-32-10096-03 Mode SYNC Exposure Time Notes 8 –Internal -Not programmable –Frame rate is internally set to correspond with the programmed exposure time plus readout time. –Internal –Programmable…

7, Dalsa Pantera TF 11M4 Pantera TF 11M and 6M User’s Manual Preliminary 7 DALSA 03-32-10096-03 Figure 1: FTF4027M Image Sensor Image Area 4008 active pixels 2672 active lines 20 20 6 black lines 6 black lines 2684 lines 44 4056 cells Output amplifier Output register 4104 cells ZY WX 2424 …

3, Pantera TF 11M and 6M User’s Manual Preliminary 3 DALSA 03-32-10096-03 Contents Introduction to the Pantera TF 11M and 6M Area Scan Cameras _______________________ 5 1.1 Camera Highlights...........................................................................................…