Kemppi MinarcTig 180 Operating Instructions Manual

17, Kemppi MinarcTig 180 16 MinarcTig TM 180 © Kemppi Oy 0615 EN 7. TERMS OF GUARANTEE Kemppi Oy provides a guarantee for products manufactured and sold by them if defects in manufacture and materials occur. Guarantee repairs must be carried out only by an Authorised Kemppi Service Agent. Packing, freigh…

5, 4 MinarcTig TM 180 © Kemppi Oy 0615 EN TIG welding In TIG welding, the welding arc is formed between a non-consumable tungsten electrode and the work piece. The resulting high temperature arc melts the work piece to form a molten pool into which a consumable ller wire, of a simila…

9, 8 MinarcTig TM 180 © Kemppi Oy 0615 EN Earth return cable Connect the earth return cable to the negative pole when welding with an MMA electrode. Connect the earth return cable to the positive pole when welding with the TIG process. Clean the work piece surface and x the earth…

15, 14 MinarcTig TM 180 © Kemppi Oy 0615 EN 5. TROUBLESHOOTING Problem Cause Main switch indicator light does not switch on The machine has no supply voltage • Check supply voltage fuses • Check supply voltage cable and plug Machine welds badly Welding outcome is inuenced by several �…

7, 6 MinarcTig TM 180 © Kemppi Oy 0615 EN 3. MACHINE USE 3.1. Before commissioning machine MinarcTig TM is packed in purpose made, recyclable packaging. However, always ensure that the equipment has not been damaged in transportation. Please ensure that any damage to the equ…

8, © Kemppi Oy 0615 MinarcTig TM 180 7 EN 3.2. General View of the machine 1. Welding torch 2. Earth return clamp 3. On/off main switch (16 amp mains supply should also be switched at the socket) 4. Supply voltage cable 5. Shielding gas hose snap connector 3.3. Cable connections C…