DataCard RP90 Plus Hardware And Driver Installation Manual

29, DataCard RP90 Plus 26 Installing the Printer Driver 20. Review the summary of choices and then click Finish. The wizard begins copying driver files. 21. The installation displays a message regarding port creation. 22. A Windows message appear…

18, RP90 Plus E Card Printer Installation Manual 15 17. The installation displays instructions to install supplies, connect the USB cable and power on the printer. • See Using the Printer in the User Guide to install supplies and power the printer. • See “Connecting the Data Cable” …

25, 22 Installing the Printer Driver 9. Use the printer LCD panel to set IPSec Type to Preshared Key. 10. Install the printer using a USB connection and install the Status Monitor. See “Install using a USB connection” on page 9 and “Installing the Status Monitor” on page 30 for the s…

38, RP90 Plus E Card Printer Installation Manual 35 5. Choose Browse for a printer, or choose Connect to this printer... with the Name empty. Click Next. 6. Browse the network for the host PC computer name and then locat…

22, RP90 Plus E Card Printer Installation Manual 19 4 Continue to press the MENU key until the setting you want to change, such as IP Address, is displayed. 5 Press the ENTER key. The display shows an asterisk (*) above the digit to change. 6 Use the Up or Down Arrow keys to change t…

46, RP90 Plus E Card Printer Installation Manual 43 Regulatory Compliance Notice for USA (FCC Notice) This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with this instruction manual, it may interfere with radio commu…