Flymo VENTURER 370 Operator's Manual

3, Flymo VENTURER 370 2 13. Do not tilt lawnmower when the motor is running, except when starting and stopping. In this case, do not tilt more than absolutely necessary and lift only the part which is away from the operator. Always ensure that both hands are in the operating position before returning…

5, 4 Starting and Stopping Cutting Height with removal of wheels (S1, S2, S3) If your lawnmower has wheel hubs as illustrated in Fig S1, the height of cut is adjusted by following steps S1-S3. 1. Remove the wheel by turning the wheel hub in an anticlockwise direction (S1) and relocate in new hol…

4, 3 Lower Handle Assembly - RE420/420c Lower Handles - RE420/420c (C1, C2) 1. If your product has Cutting Height with levers (see Cutting Height Adjustment), ensure the lever is at the Highest Cut Height before following steps 2 & 3. 2. Insert lower handles into deck as shown in Fig …

7, 6 Caring for your Lawnmower Cleaning (W, Y, Z) • USE GLOVES 1. Remove grass from under the deck with a brush.(W) 2. Using a soft brush (X) remove grass clippings from all air intakes, the discharge chute and the grass box. 3. Remove the blade to gain access to the fan and clean wi…

1, IMPORTANT INFORMATION Read before use & retain for future reference For all customer enquiries or for replacement parts, contact:- ☎☎ 01325 300303 www.flymo.com [email protected] …