Avery Dennison AP3.4 Operation & User’s Manual

7, Avery Dennison AP3.4 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 7 Some information in the configuration report are important, please check them after the self test: Performing a Calibration After the media loaded, it is necessary to do the calibration for the label size detection. 1. Press …

6, 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 6 Basic Operations Printing a Configuration Report 1. Turn off the printer. Press and hold the FEED button. 2. Turn on the power. 3. READY indicator blinks, release FEED button. 4. The printer will perform a self te…

8, 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 8 Performing a Factory Reset If you would like to reset the printer to its factory defaults after certain com- mands have been sent or settings changed: 1. Turn off the printer. 2. Turn on the power. Press and ho…

2, 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 2 Connecting the printer Overview connectors [1] Printer connectors (rear side of the device). y Centronics connector (parallel port) [1C] For parallel port connection. Mostly it is connected to the printer port of…

5, 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 5 y PAUSE Button The PAUSE Button stops and restarts the printing process in normal opera- tion. If the PAUSE button is pressed while printing is in progress, the printing stops once current label is completed. Press this button ag…

4, 11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 4 Operator Controls [2] Operator controls of the printer. Buttons There are three buttons [2], each having two basic functions. y FEED Button The FEED button forces the printer to feed one label when printer is idle (not print…