Focux CM24 Operation & User’s Manual

28, Focux CM24 CM24 Digital Cinema Processor User Manual 2013 Version 4.3 Page 28 of 31 Connector Pins Channel Polarity DB25 Pin Left + 2 ‐ 14 Chassis 1 Center + 5 ‐ 17 Chassis 4 Right + 8 ‐ 20 Chassis 7 SW + 25 �…

8, CM24 Digital Cinema Processor User Manual 2013 Version 4.3 Page 8 of 31 NOTE: If you want your CM24 to work with TMS, you must define the device name and network configuration. In that case, please continue with the following settings: …

12, CM24 Digital Cinema Processor User Manual 2013 Version 4.3 Page 12 of 31 3.3.2 Optimizing the Subwoofer and Surround Speakers According to the difference of your speaker’s frequency response, you can make good use of HPF and LPF to cut off…

11, CM24 Digital Cinema Processor User Manual 2013 Version 4.3 Page 11 of 31 D. Set the Gain for High Frequency and Low Frequency Click Gain and Delay tab on the navigation bar, it will switch to the Gain and Delay control panel. Adjust Gain fader on th…

20, CM24 Digital Cinema Processor User Manual 2013 Version 4.3 Page 20 of 31 3.7.2 Monitor (optional) This is for Monitor output. On the Monitor panel, you can set: Gain and Delay 8‐Channel Inputs Mixer (AES and Analog) PEQ HPF Compressor L…