Car audio systems USB-C20 Manual 

11, Car audio systems USB-C20 Version 31.08.2011 USB-C20 Page10 4. Operation 4.1. Activation of the video-in-motion function The video of the usbLOGiC is displayed also in motion. Note: On vehicles with previously installed factory TV-tuner an extra video-in-motion interface might be nece…

14, Version 31.08.2011 USB-C20 Page13 7. Technical Support Caraudio-Systems Vertriebs GmbH NavLinkz GmbH manufacturer/distribution corporate sales/tech dealer-support Rheinhorststr. 22 Eurotec-Ring 45 D-67071 Ludwigshafen am Rhein D-47445 Moers phone +…

9, Version 31.08.2011 USB-C20 Page8 3.4.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table (appendix A) shows the pre-programmed remote channels and the rel…

13, Version 31.08.2011 USB-C20 Page12 4.6. Picture settings By pressing the button 10, it is possible to switch between 4:3 and 16:9 picture format (Only possible on Comand APS CD/220). To enter the picture settings menu longpress button 13. The picture settings menu …

12, Version 31.08.2011 USB-C20 Page11 4.5. Button assignment table The button assignment table shows which functions of usbLOGiC and additionally connected devices can be executed by Comand buttons. Once USB or AV-input mode is activated, the Comand button in the left column …

10, Version 31.08.2011 USB-C20 Page9 3.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to female RCA connector R-CAM IN of USB-box USBC-M500. Connect the green wire of C2C-MB20 to the camera power supply (+12V max 1…