Adata Cortex MD 2MP IP66 Operation & User’s Manual

40, 39 • Upload Image by E-Mail Select this item, and the Administrator can assign an e-mail address and configure various parameters as shown in the figure below. When motion is detected, event images will be sent to the appointed e-mail address. NOTE: Make sure SMTP or…

16, 15 Step 3: Click “OK” on the Note of setting change. Wait for one minute to re-search the IP Camera. Step 4: Click the “Device Search” button to search all the devices. Then select the IP Camera with the correct MAC address. Double click on the IP Camera, and the login win…

21, 20 There are five tabs: Home, System, Streaming, Camera and Logout on the top of the viewer window. Home Users can monitor live video of the targeted area. System setting The administrator can set host name, system time, root password, network related settings, etc. Fu…

77, 76 Step 3: Click “Finish” to close the DC Viewer installation page. Then, the IP Camera’s Home page will display as follows: NOTE: Please note that the function buttons will vary depending on the camera model. …

37, 36 5.3.7 Motion Detection Motion Detection function allows detecting suspicious motion and triggering alarms when motion volume in the detected area reaches/exceeds the determined sensitivity threshold value. In the Motion Detection setting page, there is a frame (Motion Det…

36, Adata Cortex MD 2MP IP66 35 5.3.6 FTP The Administrator can set as sending alarm message to a specific File Transfer Protocol (FTP) site when motion is detected. Users can assign alarm message to up to two FTP sites. The FTP setting page is shown below. Enter the FTP details, which include server, server…