Carlton 2018 Owner's Manual

75, 18” CHIPPER MACHINE MAINTENANCE 48 LIGHTS WIRING • Check lighting wire connections for damage, and loose or broken wires. • Make sure the lights are working properly at all times when towing. • See the Machine Wiring section of this manual for wiring …

96, Carlton 2018 18” CHIPPER SERVICE CUTTER SYSTEM 69 • After knives have been removed, clean the pocket to remove any debris that may keep the knife from seating properly. DANGER – KNIVES ARE EXTREMELY SHARP • Inspect both edges of knives; …

40, 18” CHIPPER DAILY CHECKLIST 13 • Inspect knife bolts and nuts for tightness daily. It is very important to check knife bolts and nuts after first hour of operation for new bolts and nuts. It is not uncommon for bolts to loosen slightly during this time. The 18�…

15, CHIPPER LIMITED WARRANTY J. P. Carlton Co. Inc., hereafter referred to as the “Manufacturer”, warrants each new Carlton Chipper to be free of defects in workmanship and material for a period of one year. This warranty takes effect upon delivery to the original ret…

151, 18” CHIPPER DECAL ASSEMBLY 124 CHIPPER – RIGHT SIDE W/ AUXILIARY VIEWS ITEM # PART # DESCRIPTION 1 0700324-3 YOKE LIFT 2 0700331 DISCHARGE SWIVEL 3 0700324-2 YOKE LOCK HOLE (DECAL ON TOP OF CHAIN GUARD) 4 0700324-1 …

54, 18” CHIPPER TOWING GUIDE 27 • Connect chipper lights to the tow vehicle. Observe light operation to insure correct electrical connections. • Attach the breakaway switch to the tow vehicle so that it will engage the swi…