Adeunis RF ARF62 Operation & User’s Manual

14, A RF62 User Guide Ref. 11-07-V3-ffr p 12 AT Commands Description AT commands are interpreted only when the dongle is in Command mode. Commands : are used to read and update the dongle parameters A command starts with the 2 ASCII ‘AT’ characters. ‘AT’ means ‘Attentio…

18, A RF62 User Guide Ref. 11-07-V3-ffr p 16 Type Register Function Description Default value Link disconnection if register value change R / W S210 Baudrate Serial link rate in bits/s IMPORTANT see Note 1 ‘4’: 9 600 ‘5’: 19 200 ‘6’: 38 400 ‘7’: 57 600 ‘8�…

19, A RF62 User Guide Ref. 11-07-V3-ffr p 17 R/W S232 Sniff parameter Min interval see Note 2. 0..1342 Sniff offset (Dsniff) – multiply 625us Dsniff must be lower or equal to Tsniff-2 80 YES R/W S233 Sniff parameter Attempt 0..672 Number of slots listen by slave during wake-up…

6, A RF62 User Guide Ref. 11-07-V3-ffr p 4 Compliance to FCC US/CAN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc…

17, A RF62 User Guide Ref. 11-07-V3-ffr p 15 Type Register Function Description Default value Link disconnection if register value change Bluetooth management R S200 Local Bluetooth address Local Bluetooth address of the dongle The local BT address is read only. NO …

8, Adeunis RF ARF62 A RF62 User Guide Ref. 11-07-V3-ffr p 6 Interface Mechanical specification 65 x 40 x 25 mm Power supply input ARF62 dongles may be supplied using an external power supply through µJack plug (default) or through RI pin / DB connector. Selection is done with an internal …