inout Panelplayer Operation & User’s Manual

7, Panelplayer User Manual v.1.4 Page 6 3 Description and connections 3.1 Command description 1 Connector for outside connection of the memory and command buttons. 2 Flash memory introduction slot for Secure Digital or MultiMedia Card. 3 Command keys:  = (brief pressure) precedent …

28, Panelplayer User Manual v.1.4 Page 27 INPUT FILE INPUTS BINARY COMBINATION 1 2 3 4 5 6 7 8 (.mp3) 1 1 1 O 1 1 1 O = 119 IN 1 + IN 2 + IN 3 + IN 5 + IN 6 + IN 7 O O O 1 1 1 1 O = 120 IN 4 + IN 5 + IN 6 + IN 7 1 O O 1 1 1 1 O = 121 IN 1 + IN 4 + IN 5 + IN 6 + IN 7 O 1 O 1 1 1 1 O = 122 IN …

4, inout Panelplayer Panelplayer User Manual v.1.4 Page 3 7. Operation with logical inputs 7.1 Introduction to the logical input operation mode 7.2 Binary input command codes 8. Special operations 8.1 Connection of two Panelplayers with different programming 8.2 Amplifier connection to 40W bridge 9. RS48…

12, Panelplayer User Manual v.1.4 Page 11 4.3 How it is managed by Panelplayer At the time the device is turned on, or when the flash memory is inserted, Panelplayer will start to read the main directory of the memory; once it has found the file config.txt, it interprets the parameters inserted in each…

16, Panelplayer User Manual v.1.4 Page 15 4.9 Input management parameters The playing of the files takes place by activating the available logical inputs, the activation modes are set through the IMOD, TPCM MICP and MIRS parameters inserted in the configuration files. Example: IMOD=0 TPC…

8, Panelplayer User Manual v.1.4 Page 7 3.2 Connection description 6 VAC/DC Input feed 12÷24VDC. +12VDC Auxiliary + 12Vdc voltage, available for input activation or outside feed sensors. MAX. 100mA. 7 GND Ground for input activation using outside contacts; auxiliary ground voltage. IN1 Multi-func…