Bicom Systems SIP-T18P Operation & User’s Manual

2, Bicom Systems SIP-T18P Yealink Phones User GuideI © 2003 - 2012 Bicom Systems Table of Contents Part I Introduction 1 Part II Requirements 1 Part III Installation 2 ................................................................................................................................... 31 Power Adapter .…

16, 14 Yealink Phones User Guide © 2003 - 2012 Bicom Systems Click on the Auto Provision button to run auto provisioning process, then you'll be asked to confirm action. To continue click on OK button. Auto provisioning process will start during phone reboot process, phone will pickup app…

21, 19Shared Parking © 2003 - 2012 Bicom Systems exten => 709,hint,park:709@parkedcalls exten => 710,hint,park:710@parkedcalls 4. Click on the Save button to save changes. 5. Click on the Reload button top right in order to reload PBXware for changes to take effect. …

7, 5Registering Phone © 2003 - 2012 Bicom Systems Make sure Yealink UAD is enabled. To check the UAD status click on the edit icon corresponding to your Yealink phone. Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes. Click on the Save button t…

14, 12 Yealink Phones User Guide © 2003 - 2012 Bicom Systems 4.2.3.1 DHCP 1. Configure DHCP Make sure your DHCP router is configured to use option 66 to automatically instruct phones with the URL for auto provisioning. For more information refer to your router documentation or contact your network a…