Mammut PULSE Barryvox Instruction Manual

14, 21 If the + sign appears for an extended period of time, this indicates that not all the buried subjects can be located using the standard mode. In this case, it is advised to switch to the analog mode. 4.5 Analog Mode In the analog mode, the transceiver shows distance and directio…

16, 2524 SEARC H Mode 4. Maintain the orientation of the transceiver during this phase and concentrate on the increase or decrease of the distance indication as well as the volume of the analog tones. 5. At the point with the lowest distance reading, you leave the micro search strip pattern to…

10, 13 4.1.2 Secondary Search Phase The basic pattern of the primary search is suspended and the signal is followed to the buried subject. • Coarse Search: From where the signal is first detected to the approximate location of the buried subject. • Pinpointing Phase: Pinpointing o…

15, Mammut PULSE Barryvox 2322 SEARC H Mode 4.5.2 Search Tactics with Multiple, Widely Scattered Burials 1. Mark the location on the avalanche where the «multi- ple burial» icon appeared on the display or where you left the primary search pattern. 2. Search for the first buried subject using the informa- t…

20, 33 5.3.11 Reset Device The function «Reset device» allows you to restore all the default factory settings. All modified settings as well as owner data are lost. 6. Additional Information 6.1 Tone-only Mode (TOM) If the display is defect, you have to search using the tone-only mode. Turn the tran…

22, 6.9 Warranty There is a 5-year warranty on the Barryvox transceiver (excluding the batteries, the carrying system, and the wrist loop) from the date of purchase shown on the purchase receipt. In case of a warranty claim, all parts that can be shown to have material or production def…