CAS LP-2 Owner's Manual

44, 6 Programming 38 Pressing the SAVE key at any point or the ENTER key while the cursor is on the last field will save the current screen contents and exit. Press the ESC key to exit Time and Date. 6.2 Settings When the screen is at the Main Menu Press 7 , enter…

49, CAS LP-2 6 Programming 43 will appear. The norm is 100. 1 Feed Adjustment is 1/8 of a millimeter, therefore if you change the Feed Adjustment from 100 to 108, then everything will print 1 mm higher on the label. You can also use this feature to make sure that when you print a lab…

39, 6 Programming 33 6.1.1 Store Settings Store Settings is used to program many of the scale’s features. The Store Settings menu screen appears as follows: Only the Master scale can send program changes across the network. Therefore, if you make …

42, 6 Programming 36 Network Management 3 Quick Program Keys Same as respective menu’s requirements. Key name Required Password level RETURN key in REG mode 2 RETURN key in MGR mode No password protection. OVERRIDE key in REG mode 2 OVERRIDE key in M…

16, 3 Proper Operation 10 3.3 Dont’s  DO NOT subject the platter to sudden shocks.  DO NOT drop anything on the platter.  DO NOT store any thermal labels where they may be subject to:  direct sunlight  high humidity  high temperature  dust. �…

20, 4 Nomenclature 14 4 Nomenclature 4.1 Scale Overview 1) Pictured below are important scale components and parts that you should be familiar with. # Description # Description # Description 1 Advertisement Insert, rear 8 Fuse Cap 15 Power Switch 2 Conn…