advidia VP-4 Operation & User’s Manual

35, 35 Figure 6.15 Email Settings (1) 3. Configure the following Email settings: Authentication (optional): If your mail server requires authentication, check this checkbox to use authentication to log in to this server and enter the login User Name and Password. SMTP Server: The …

37, 37 can view the capacity, free space, status, type and property of the added network disk. Figure 6.18 Initial Disk (2) If the status of the network disk is Uninitialized, select the disk from the list by checking the checkbox and click the Init button to start initializing the d…

58, 58 Chapter 9: Log Search and Maintenance 9.1 Log Search Purpose The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time. Before you start The Log function can be realized only when the En…

51, 51 Figure 7.21 Tamper-proof Alarm Settings 3. Click checkbox of Enable Tamper-proof. 4. Set the tamper-Proof area. Please refer to Step 1 Set the Motion Detection Area in Chapter 8.3.1. 6. Click Edit to edit the arming schedule for tamper-proof. The arming schedule configuration is th…

15, 15 Figure 3.6 Enter guest User Account 3. Enter admin user account. (1) Type “su admin” and press “Enter”. (2) Input the password (default: 12345) of the admin user account. (3) Press “Enter” to have the symbol “#”on the interface which indicates the current …

10, advidia VP-4 10 2.3 Alarm Connections 2.3.1 Alarm Input Connections VP-4 supports the open/close relay input as the alarm input mode. For the alarm input signal not in open/close relay signal mode, please follow the connections shown as below: Alarm input connec…