Marine PC MPC-ML10DVR Operation & User’s Manual

8, FAST FORWARD - REWIND While the le is being played, the le can be fast searched by using the middle two buttons on the right side. The le will then be advanced or played backward at double of normal speed. TIP: In order to facilitate quickly locating the images to be re…

9, Marine PC MPC-ML10DVR MPC-ML10DVR-UM(B) 4/2011 9 NVIS OPTION Overview The MPC-ML10DVR is often used as a display for low light and infrared cameras for operations at night. Operator situational awareness can be further enhanced with the use of Night Vision Gog- gles or Monoculars, commonly referred to a…

13, MPC-ML10DVR-UM(B) 4/2011 13 Maintenance Other Maintenance Only MarinePC Qualied Service Personnel shall perform all maintenance except for the repair or replacement of external cables. To avoid shock and re hazards, replaced the unit’s power cord if: • Insulation bec…

25, MPC-ML10DVR-UM(B) 4/2011 25 On left bezel, use UP (Next) or DOWN (Previous) Arrow Buttons to move through thumbnails to select a video to view or to move to another Video Gallery page in the DVR Menu. A highlight box will appear around the selected (active) Thumbnail. • Pres…

2, 2 MPC-ML10DVR-UM(B) 4/2011 Information Disclaimer This MarinePC User Manual is provided “as-is”, without warranty of any kind, either expressed or implied, includ- ing but not limited to the implied warranties or merchantability and fitness for a particular purpose. Documentation Change Notic…

17, MPC-ML10DVR-UM(B) 4/2011 17 OPERATOR CONTROLS On left hand side of Display bezel are six (6) Operator Control Buttons (Figure 7). These Buttons are used in the basic operation of the Display as well as when using the the Digital Video Recorder (DVR) (See Digital Video Recorder…