Handiquilter HQ Pro-Stitcher Operation & User’s Manual

67, www.HandiQuilter.com/ProStitcher 07/23/12 Design Menu 5.21 Freehand e HQ Pro-Stitcher can record the movement of the quilting machine using the functions available in the Freehand panel. Because the Pro-Stitcher is reading the motion of the carriage motors, the Freehand fun…

24, Handiquilter HQ Pro-Stitcher www.HandiQuilter.com/ProStitcher 07/23/12 Installation Instructions 3.19 5. Make adjustments to the placement of the blue rack as necessary to align the blue rack with the front white gear on the HQ Pro-Stitcher carriage (Figure 3.34). 6. If alignment using the wooden block is acc…

76, Pro-Stitcher User Manual7.2 Quilt Menu New Start/End A quilter may choose to start quilting a design from some point other than the designed start point. is may occur because the thread breaks, the bobbin runs out, or the quilter simply wants to stitch a specic portion of a design. Simi…

46, www.HandiQuilter.com/ProStitcher 07/23/12 Overview 4.9 Ruler e Ruler tool is used to measure distances in a design or directly on the quilt (Figure 4.24). To use the ruler, move the machine so the crosshairs (or the needle) are at the starting point of the item to be measured. Press the Ru…

77, Quilt Menu 7.3 Move e Move feature enables the quilter to move the quilting machine in any of the 7 directions indicated by the direction arrows by pressing that arrow button (Figure 7.5). e speed that the quilting machine moves can be set by altering the Jog Speed with either the +…

33, HQ Pro-Stitcher User Manual07/23/123.28 Installation Instructions Figure 3.53 Computer/Touch Screen Monitor Assembly 1. Remove the front handlebar from the front of the quilting machine, making sure to rst disconnect the handlebar D-cable from the side of the head and then r…