Elgar GUPS 2400A–107 Operation Manual

13, Installation GUPS 2400A–107 Operation Manual 2-5 Figure 2–3. GUPS 2400A-107 Dimensions (Top, Side, and Front Views) …

4, Elgar GUPS 2400A–107 SAFETY NOTICE Before applying power to the system, verify that the GUPS 2400A–107 is configured properly for the user’s particular application. WARNING Hazardous voltages in excess of 232 VRMS, 328V peak may be present when covers are removed. Qualified personnel must use e…

23, Operation GUPS 2400A–107 Operation Manual 3-7 3.9 3.9.1 RS-232 Data Communications Port The RS-232 data communications port provides an interface between a data terminal (or a computer emulating a data terminal) and the GUPS 2400A-107. It allows transfer of information such as paramet…

22, Operation 3-6 GUPS 2400A–107 Operation Manual 3. To turn OFF the output, press the OUTPUT ON switch again; the switch has a alternating ON/OFF action. The unit will shut down (with no AC input present); the inverter and all control circuits will turn off. 3.8.1 Battery Care and H…

34, Maintenance 4-2 GUPS 2400A–107 Operation Manual 4.5 Troubleshooting In the event that a problem arises during unit operation, refer to the guidelines listed in Table 4–1 to assist in determining the cause and to repair the unit as quickly as possible. Symptom Probable Cause Su…

20, Operation 3-4 GUPS 2400A–107 Operation Manual If SHUTDOWN is asserted while the AC input is not present and the inverter is running from the battery, the output relay will open and output power will be turned off; the inverter and control circuits will also be shut down. After shutdo…