Aeroflex GR-UT699 Operation & User’s Manual

10, Aeroflex GR-UT699 10 GR-UT699 Development Board User Manual 2 ELECTRICAL DESIGN 2.1 Block Diagram The GR-UT699 board provides the electrical functions and interfaces as represented in the block diagram, Figure 2-1. Figure 2-1: Block Diagram of GR-UT699 board The Main PCB is of standard Double Eurocard format (2…

12, 12 GR-UT699 Development Board User Manual 2.3.1 SRAM The GR-UT699 board is laid out with two SRAM memory banks but only has one bank mounted as standard. Each bank is made up of five CY7C1069AV33. These devices are 16Mbit (2Mbyte x 8 bit devices with 10 or 12 ns access…

2, 2 GR-UT699 Development Board User Manual Information furnished by Aeroflex Gaisler AB is believed to be accurate and reliable. However, no responsibility is assumed by Aeroflex Gaisler AB for its use, nor for any infringements of patents or other rights of third parties which may result f…

26, 26 GR-UT699 Development Board User Manual 3 SETTING UP AND USING THE BOARD The default status of the Jumpers on the boards is as shown in table Figure 3-1. In this configuration the board is set up as a PCI Host. For the meaning of the various jumpers, refer to Table 4-23 and RD 1. Jum…

39, 39 GR-UT699 Development Board User Manual 4.2 List of Oscillators, Switches and LED's Name Function Description X1 OSC_MAIN Main oscillator for ASIC DIL8 socket, 3.3V (75MHz as standard) X2 OSC_ETH Oscillator for Ethernet PHY transceiver, SMD type, 3.3V, 25.000MHz X3 OSC_SPW DIL8 socket…

29, 29 GR-UT699 Development Board User Manual © Aeroflex Gaisler AB March 2013, Rev. 0.6 Figure 3-2: GRMON Output Screenshot #2 …