Black Widow 5-BUTTON SERIES Operation Manual

12, 12 WIRING DIAGRAM © 2004 64-37.50, 3/04 Rev. 2 The polarity for the built-in parking light,dome light, and auxiliary relay is set by the placement of the jumper on the 3 pins next to each relay. The default settings are illustrated below. JUMPER SETTINGS BW3750 new size.qxd 4/14/2004 …

6, 6 • GRAY WIRE - Auxiliary 1 output (+/–) 15A relay. Connect to an optional feature such as trunk release, etc. • WHITE WIRE - Parking Light output (+/-) 10A relay. Connect to the vehicle’s parking light wire. If the vehicle’s parking light circuit exceeds 10 amps a relay is require…

2, Black Widow 5-BUTTON SERIES 2 PASSIVE ARMING The passive arming feature allows the system to automatically arm after closing all doors. The Passive Arming feature requires the ignition to have been on for at least 10 seconds prior to exiting the vehicle. This enables the key to be turned on then off quickly to avoid passive…

8, 8 Programmable Features 1. Arming Mode. Select between manual arming (Active), automatic arming (Passive), and automatic arming with chirps that countdown every 2 seconds until armed. 2. Parking Light Operation.Selects whether the parking lights flash twice or remain on for 30 seconds after disar…

9, 9 Active.Pressing transmitter button 4 with the ignition on will manually activate the Anti- Carjacking feature. Passive. When selected, the Anti-Carjacking feature will activate whenever a door is opened while the ignition is on. Full-time.When selected, the Anti-Carjacking feat…

4, 4 Passive. When selected, the anti-carjacking feature will activate whenever a door is opened while the ignition is on. Press the valet switch 3 times to deactive the Passiv e carjack feature. Full-time. When selected, the anti-carjacking feature will automatically activate each time the igniti…