Elmo SUV-Cam II Instruction Manual

25, Preparations (Continued) 113 1 Remove the camera head. Turn the screw lock of the head connector counterclockwise to remove the camera head, and attach the rubber cover. Waterproof Function of This Recorder The camera head section of this recorder is waterproof. Note with care that the…

32, Recording (Continued) 120 Changing the Record Settings 1 Turn ON the power supply. (ÎP115) 2 Display the Record Mode setting screen. Press [REC] once to enter the Record mode, and then, press [MENU] to appear the Record Mode setting screen. 3 Select the record setting item. Move t…

45, Using in Connection with External Devices (Continued) 133 Outputting Video to the External Monitor When connecting the recorder with any external equipment, turn OFF the power supply to the recorder beforehand. 1 Connect the AV cable. Remove the rubber cover from the Earphone /AV output ter…

61, Elmo SUV-Cam II 149 Adjusting the Focus Do not scrub the lens or give a shock to the lens, or the lens could be damaged or failed. Note that separation at any point other than the point where separation is permitted could cause failure. Apply grease to the O-ring of the camera unit mounting bra…

69, Troubleshooting (Continued) 157 ■Others Symptom Cause Remedy “Load the SD memory card” appears. The SD memory card is not loaded. Load the SD memory card. “The SD memory card is locked” appears. Is the SD memory card locked? Release the lock of the SD memory car…

55, Changing Various Settings on the Setting Item Screen (Continued) 143 Format SD Card 1 Turn ON the power supply. (ÎP115) 2 Display the setting items. Hold down [MENU] to display the setting items. 3 Select “SD Card.” Select the “SD card” by using [∧] or [∨], and press [E…