Harvest TEC 890A Owner's Manual

10, 10 CONVERTING YIELD DATA FILE PC Installation of Yield Data File Converter Program 1. Plug the USB flash provided in the 880 kit into the USB port on the computer. 2. The USB flash will have a zipped file on it and will be labeled ydConverterSetup-V1_0_0_0. a. Doub…

13, 13 WIRING – PIN OUT DIAGRAMS Com munication harness - 006 - 5672 Pin 1 Red Can 12 volt Pin 2 Red Battery 12 volt Pin 3 Green Comm channel OH Pin 4 Silver Shield Pin 5 Yellow Comm channel OL Pin 6 Not used Pin 7 Not used Pin 8 Bla…

11, 11 Converting Yield Data File 1. The yield data file that was created on the USB flash while baling will need to be converted before it can be utilized in a yield mapping program. Start by double clicking on the yield mapping file converter Icon located on the compu…

5, Harvest TEC 890A 5 Wiring Diagram Setup Instructions 1. Turn the 500/565 control system on. After a few seconds the Main Menu screen should appear. Press Setup Mode, the Setup Mode screen will then appear. 2. Press Baling Rate. The Bale Rate Settings screen will then appea…

8, 8 SETUP INSTRUCTIONS 1. Turn the 565 control system on. After a few seconds the Main Menu screen should appear. Press Setup Mode, the Setup Mode screen will then appear. 2. Press Yield Mapping setup. a. Yield Mapping Setup should now be displayed. 3. Press the underl…