Charlie Lab Megabeat One Operation & User’s Manual

6, 1. INTRODUCTION We wish to compliment you on your new Megabeat One. Megabeat One is a “Hard Disk Midi Player”, i.e. a Standard Midi File Player, in 0 and 1 format, based on hard disk. Unlike the normal Midi File reproducer, which use the floppy disk as a support (i.e. from which they read a…

45, 5.3.1 MEDIA PLAYER This parameter identifies the kind of media from which Megabeat One reads songs (during PLAY phase). The values are: ◆ H.DISK (songs will be read from the inside hard disk); ◆ CD ROM (songs will be read from the outside CD ROM reader). In order to change the MEDIA PLAYER param…

21, ◆ CONTIN: It is usually called Continue and is often used together with the PLAY/STOP functions. It allows you to continue to play the song from the point where it was stopped by means of the STOP button. 4.3.1 SELECTING/DESELECTING A SONG To select a song in the SINGLE PLAY mode, h…

51, NOTE The Megabeat One has an always-enabled function called MIDI SOFT THRU. This function produces the retransmission of the messages received by Megabeat One MIDI IN on MIDI OUT. The messages received by MIDI IN are “merged” (by an internal Midi Merge function) with the MIDI messages c…

12, 2.3 MIDI CONNECTIONS The MIDI connections between Megabeat One and any other external sound generator are very simple and are possible through only one MIDI cable (not included in the set). You have to connect the MIDI OUT (19) of Megabeat One to the MIDI IN of the external sound generator.…

40, Charlie Lab Megabeat One IMPORTANT Do not use the EXIT button placed under the PAGE/VALUE Dial, you will loose all the work you have done. 5. Save the changes made to the group with the SAVE soft key (see below). ❐ DELETE: allows you to remove a song from a group. 1. Before pressing the DELETE soft key, posit…