Blodgett ZEPHAIRE-E Installation & Operation Manual

1, ZEPHAIRE-E & ZEPHAIRE-E PLUS CONVECTION OVENS INSTALLATION - OPERATION - MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802) 658-6600 Fax: (802) 864-0183 PN 90147 Rev T (11/12) © 2012 - G.S. Blodgett Corporation …

14, 12 Operation Zephaire E Plus Solid State Digital LIGHTS COOL DOWN BLOWER HI LOW OFF OFF ON MAN AUTO 1 4 5 9 3 2 14 6 7 8 12 10 11 13 Figure 12 CONTROL DESCRIPTION 1. CAVITY LIGHTS ON/OFF - Operates the oven cavity lights. 2. BLOWER ON/OFF SWITCH - Controls the operation of the blow…

15, 13 Operation To set the hold time: 1. Press HOLD key (12) to turn hold mode on. NOTE: HOLD light is on. 2. Rotate dial (8) to enter the hold temperature. 3. Press START/STOP key (9) To set the pulse time: 1. Press PULSE KEY (13) to turn pulse mode on. NOTE: Pulse light is on. 2. R…

19, 17 Maintenance Troubleshooting Guide POSSIBLE CAUSE(S) SUGGESTED REMEDY SYMPTOM: Elements will not heat • Oven not plugged in. • Power switch on the control panel is off. • Control set below ambient temperature. • Doors are open. • Plug in electrical supply cord. • Set the co…

9, Blodgett ZEPHAIRE-E 7 Installation Oven Assembly LEG ATTACHMENT 1. Push the oven onto a lift with the bottom of the oven down. 2. Align the threaded stud in each leg with the nut locat- ed inside each bottom corner of the oven frame. Turn the legs clockwise and tighten to the nearest full turn. 3. Align the two l…