KERN CPB 3K0.1 Operating Manual

10, 4 Basic Information (General) 4.1 Proper use The balance you purchased is intended to determine the weighing value of material to be weighed. It is intended to be used as a “non-automatic“ balance, i.e. the material to be weighed is manually and carefully placed in the cent…

33, KERN CPB 3K0.1 13 Service, maintenance, disposal 13.1 Cleaning Before cleaning, please disconnect the appliance from the operating voltage. Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth dampened with mild soap suds. Ensure that no liquid penetrates…

35, Error message Description Possible causes Err 4 Zeroing only in the permitted range (4% of the max. weighing range) and not for overload/underload • Object on the weighing plate • Overload when zeroing • Improper adjustment • Damaged weighing cell • Damaged electronic…

8, 3.1 Overview of display Weight Reference weight Pieces 0.0 0 0 dddddddddd 3.1.1 Display weight Here, the weight of your goods is displayed in [kg]. The arrows above the symbols show: Battery very low NET Net weight Stability display a Zeroing display 3.1.2 Display …

32, 12 AUTO OFF function For battery operation the balance has an automatic switch-off function which can be activated or deactivated in the menu. Proceed as follows: Operation Display Switch on balance and press the 0 key during self test SLEEP NODE 1. Automatic swit…

28, 10.4 Interface parameter The RS-232 interface uses parameters set by the user such as language, baud rate, printing mode, etc. Navigating in the menu:  To access the menu, hold the key pressed for 4 seconds  Use the TARE key for parameter selection  Use the key to change the…