KERN FIS 30K10 IPM Operating Instructions Manual

35, FIS-BA-def-0411 92 There are several ways of increasing the accuracy in piece counting. • When determining the reference weight, use, for example, 10 rather than one reference piece (weigh 10 pieces and divide the obtained weight value by 10). - This yields a number of adv…

37, FIS-BA-def-0411 94 9.3 Start of counting procedure with number of reference piece recommendation F Reference weight mass too small. Proposal: apply 3 additional reference pieces. Apply 3 additional reference pieces Automati…

2, FIS-BA-def-0411 59 8 TOLERANCE CHECK WEIGHING...................................................................................................... 86 8.1 GENERAL ...............................................................................................................................…

24, KERN FIS 30K10 IPM FIS-BA-def-0411 81 7 Weighing operation 7.1 Function test ON OFF Automatic function test by applying voltage or activating the ON OFF key (test). All display segments and LEDs are activated. Display of the installed programme version …

1, E KERN FIS Version 1.1 02/2004 Operating Instructions Electronic Precision Balance List of contents: 1 TECHNICAL DATA.............................................................................................................................. 60 2 DECLARATION …

44, FIS-BA-def-0411 101 12 Parameter and service menu The service menu allows parameters to be set for a diversity of tasks and requirements. • Metrological functions • Functions and applications Functions are also made available for commissioning, tests and analyses. The settabl…