KERN PLE Operating Manual

54, PLE-BA-e-0812 54 14.2.4 Setting for Baud rate "P2.3" bAud” ⇒ ⇒ ⇒ ⇒ 14.2.5 Parameters for RS232 interface "P2.4 S_rS" ⇒ ⇒ ⇒ ⇒ 7d2SnP : 7 data bit, 2 stop bit, no parity 7d1SEP : 7 data bit, 1 stop…

30, KERN PLE PLE-BA-e-0812 30 12.4 AUTO-OFF - Automatic switching-off If the AUTO-OFF function is activated, the balance switches off automatically to save the rechargeable batteries after 5 minutes without load change. Function Adjustment Mains power supply Battery power supply t1 = no…

48, PLE-BA-e-0812 48 13.9 PRE-TARE memory (P4.b tArE) • Call function ⇒ ⇒ ⇒ ⇒ • Input of PRE-TARE value Ö Select the point to be changed by pressing the button and the number by pressing the button and the active point flashes in each…

34, PLE-BA-e-0812 34 Ö All activated operating modes can now be called up in Weighing mode by pressing the button. Example of call-up of Tolerance weighing function: Press the button in Weighing mode and the initial activated function will appear: ⇒ …

41, PLE-BA-e-0812 41 13.4.2 Numerical input of the reference weight (P4.6 Prcb) • Call function ⇒ ⇒ ⇒ • Make reference − You will be asked to enter the reference weight by a flashing message. ⇒ − Select the point to be changed by…