Keyence BL-500 Series Operation & User’s Manual

86, A.9 Default Settings 74 A.9 Default Settings In the main setting screen, the default bar code selections for the four bar code fields are as shown below. Bar Code Default Settings Below are the default settings for each bar code setting screen. CODE 39 ITF …

3, iii Contents Safety Precautions ...........................................................................................................xi Symbols ......................................................................................................................................…

83, A.6 Troubleshooting 71 Check whether the transmitter (light source) and the receiver (optical pickup) are clean. If moisture, oil or dust adheres to the transmitter or the receiver, wipe the units using a soft cloth and a mild plastic cleaner. Check the environmental conditions. S…

62, 4.3 Command Communication 50 Clearing transmission buffer [BCLR] Clears data stored in the transmission buffer. Command: BCLR Response: OK Shift to setting mode [SSET] Enters the setting mode (see page 49). Command: SSET Response: OK Laser off/Resetting Laser off Turns off the laser emission when t…

80, A.4 Dimensions 68 BL-500/501/500H/501H (with mounting bracket) BL-550/551/550H/551H (with mounting bracket) 61 41 2 34 28 2 16 29 10.510.5 R19 2-R2.25 50° ø4.3 mounting hole 48 47 2 9.5 16 3 4.5 5 37.5 49 4.5 11 3 …

89, Keyence BL-500 Series A.9 Default Settings 77 Trigger input default settings Communication Parameters default settings Communication strings default settings …