AirLive VOIP-440S Operation & User’s Manual

6, WAN WAN status Interface Status: these are the details of your interface’s status. Enabled: “Yes”, lets you know that your interface is enabled and ready to be used. Service: either “Routed or Bridged”, tells you the level of your interface’s connect…

28, SNMP Configuration 1. SNMP Trap Configuration IP address: Trap host IP address Trap Community: The community name used by the SNMP manager to verify traps. The default value is ‘public’ 2. SNMP Community Configuration Read Community: The community name use…

3, INDEX 1. Home…………………………………………………… 1 2. WAN………………………………………….………… 2 WAN Status………………………………………………….……………… 2 WAN Configuration…………�…

13, WAN VLAN Configuration WAN VLAN Tag: VLAN tag for all outgoing packets on interface. The value should be between 0 and 4094 WAN Priority Tag: Priority tag for all outgoing packets on interface. The value should be between 0 and 7 …

21, SIP Extensions 1. Support PRACK method: enable SIP PRACK support. 2. Encode SIP URI with user parameter: encode user=phone parameter in SIP URI. 3. Send INVITE with Timer header: encode Timer header in all INVITE requests for ringing timeout 4. SIP s…

9, AirLive VOIP-440S Multicast Limit: the value specifies the maximum limit on the percentage of multicast packets which will be bridged to the destination interface (as a percentage of the source side bandwidth) …