AirLive AIRCAM POE-250HD Operation & User’s Manual

42, AirLive AIRCAM POE-250HD 5. Administrating the Device AirLive AirCam POE-250HD User’s Manual 38 Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second as possible. User need to set reaso…

75, Appendix G AirLive AirCam POE-250HD User’s Manual 71 4. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web page of Networked Device and setup the necessary information of DDNS and PPPoE after the application of DDNS service.…

74, Appendix G AirLive AirCam POE-250HD User’s Manual 70 (10). Click the “Get Started”. (11). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to reme…

18, 4. Operating the Network Camera AirLive AirCam POE-250HD User’s Manual 14 Start-up screen will be as follow no matter an ordinary users or an administrator. Monitor Image Section The image shot by the Network Camera is shown here. The date an…

77, Appendix I AirLive AirCam POE-250HD User’s Manual 73 Appendix I : 3GPP To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. Note that to use the 3GPP function, it strongly recommends to …

11, 2. Package Contents AirLive AirCam POE-250HD User’s Manual 7 2.2 Mounting the Camera Ceiling Mount Fix the camera to ceiling with the three supplied screws. Install the Camera in LAN 1. Plug an Ethernet cable into the Camera Connect…