Blue Bamboo P25 Development Manual

34, P25 Development Guide www.bluebamboo.com 34 3.4.1 Format of Printing or Downloading Data Frame C0H (SOF) ‘D’ (0x44) (TOF) DATA ID Number DATA Length DATA CHECK SUM C1H (EOF) 1 Byte 4 Bytes Data …

27, P25 Development Guide www.bluebamboo.com 27 UART0 (BT port) default Baud Rate is 38400, and it cannot be changed. If set baudrate to 0, then back to default baudrate. (Since S1.0.42) The default Baud rate in the bootloader firmware is 115200, and it can not be changed. These com…

14, P25 Development Guide www.bluebamboo.com 14 [Reference] ESC -, GS ! ESC – [Name] Turn underline mode on/off [Format] ASCII ESC - n HEX 1B 2D n Decimal 27 45 n [Range] 0 ≤ n ≤2 (or 48 ≤ n ≤ 50) [Description] Turns underline mode on o…

10, Blue Bamboo P25 P25 Development Guide www.bluebamboo.com 10 2.2 Line Space Commands The P25 printer supports the following commands for setting line space. These commands can only be used for specifying line space, not actually feeding paper. The line space set through these command…

42, P25 Development Guide www.bluebamboo.com 3. Sync Session key Main procedures of syncing session key is shown as the below diagram. The customer can encrypt the card informat…

23, P25 Development Guide www.bluebamboo.com 23 ESC X X 1 x y d1…dk X 4 x y d1…dk [Name] Print bit-image horizon mode [Format] ASCII ESC X 1 x y d1...dk ESC X 4 x y d1...dk HEX 1B 58 31 x y d1…dk …