AG Neovo S-17A Operation & User’s Manual

3, 2 Notes Before Use Installation  Do not cover or block the vent at the back of the LCD display.  Keep LCD display away from direct sunlight or heat source, e.g., electrical heater or radiator. Avoid dust, mechanical vibration or shock. Connecting to Power  Use …

13, AG Neovo S-17A 12 Troubleshooting Guide Symptoms Check • No display • Power LED is off. • Check if the power of your LCD panel is ON. • Check if the adaptor is correctly connected to your LCD panel. • Check if the power cord is correctly connected to the adaptor. • Chec…

17, 16 Current information regarding TCO'95 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ TCO’95 is a co-operative project between TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (Th…

8, 7 Installation Connecting LCD Display to PC (Analog)— 1. Remove all the packages from the panel. 2. Place your LCD display in a suitable place. Make sure that there is enough space for adjustment, especially the rear of the panel. 3. Turn off your PC and connect the D-sub 15-p…

7, 6 Control Buttons Front View ON/OFF Button Push once to turn your LCD display ON and push again to turn it OFF. Power LED The power LED will turn to green under normal operation and orange when in standby mode. Auto Adjustment The auto adjustment function will automatically tune …