Chill Station Water and Beverage Dispenser Operation & User’s Manual

14, Chill Station Water and Beverage Dispenser 14 Cleaning the Chill Station Warning! If you spill water into the cabinet while cleaning the Chill Station, you could receive an electrical shock resulting in injury or death. To prevent receiving an electrical shock during cleaning, move the two power switches on the back of the …

19, 19 Disposing of the Chill Station Your Chill Station uses an environmentally‐friendly refrigerant. However, should a day arrive that you must dispose of your Chill Station, you must still have an EPA‐certified technician recover and properly dispose of the refrigerant. Failure to proper ly …

5, 5 Selecting the Right Location Select a location that is dry, level, and out of direct sunlight. The location should remain between 50°F (l0°C) and l00°F (38°C). Place the Chill Station out of the way of pedestrian flow and in a location that will safely support its weight including…

20, Notice All information in this user guide is based on information we believe to be reliable at the time of printing. Al’s Beverage Company reserves the right to make changes without prior notice. Because of developments in technology, the information and p…

7, 7 Location and Names of Components and Controls—Back Side Water Temperature Adjustment Screw The water temperature adjustment screw noted above is set at the factory to provide chilled water. If the water is too warm or cold for your preference, you can adjust the water …

15, 15 Cleaning the Water Delivery System (Recommended Every Three Months) Wait until the water bottle is empty and then follow these steps to clean the water delivery system: 1. Place a container under the dispensing nozzle and press the water dispensing button until no more w…