DGTech HyperRemote Operation & User’s Manual

4, User Guide HyperRemote ver. 1.1 DGTech Engineering Solution www.dg-tech.it 4 Push “Next” to perform the installation. Installation procedure is completed. Press “Close” to exit the installation wizard, then reboot the PC. …

7, DGTech HyperRemote User Guide HyperRemote ver. 1.1 DGTech Engineering Solution www.dg-tech.it 7 Figure 4: if remote mode is active, by pressing the green small button on the remote it is possible to show or hide the zoom window. This window can be useful to help p…

9, User Guide HyperRemote ver. 1.1 DGTech Engineering Solution www.dg-tech.it 9 DRAG MODE On mouse mode, by pressing the red button on the remote it is possible to activate (or deactivate) the drag mode. When drag mode is on the mouse left button is continuously…

6, User Guide HyperRemote ver. 1.1 DGTech Engineering Solution www.dg-tech.it 6 Figure 1. the four colored buttons on the remote permit to modify the functions of the software. Figure 2. on remote mode, the arrows works as the keyboard arrows, while the ok button emulate…

5, User Guide HyperRemote ver. 1.1 DGTech Engineering Solution www.dg-tech.it 5 Capitolo 2 First use Once the PC has restarted Hyperremote automatically starts, then the following window appears. This window is the control panel of HyperRemote. From this window it is possible …