ALERTEGPS G420 Owner's Manual

9, ALERTEGPS G420  0QFSBUJOHJOTUSVDUJPOT  The G420 features two overspeed indicators that will light blue or red, depending on the speed of your vehicle. If you don't drive over the speed limit, the indicators will light blue. If you drive over the speed limit, the indicators will lig…

7, To increase the volume, press Press the button to activate the comfort mode. The speed of the vehicle will not be displayed anymore. As you approach a speed control, the display will light up. To descrease the volume, press COMFORT MODE Press to…

5, Clean your windshield and your dashboard first Place the magnet - do not remove the protection! - on your dash- board Place the unit on the magnet Connect the G420 to the cigar-plug Turn the power on -> Press the "On / Off" button The G420 starts  *OTUBMMJOHUIF(�…

11,  (FOFSBMOPUJDFT8BSOJOHT  • The G420 cannot work properly in a tunnel or a basement, because the satellite reception is disturbed. We strongly recommend driving carefully in those areas. The G420 needs a short time to establish the connection to the satellit…

8,  0QFSBUJOHJOTUSVDUJPOT  Starting the G420 As you approach a fixed speed camera : At 300 meters, the distance is counted down. As you approach a mobile speed camera : 250 … 200 … 150 … 100 meters from the zone. 50 meters from the zone. The control or danger zone is being …